(LNG-CNG) Gas Stock Tank Transport refers to the transportation of special tanks that store and transport gases such as liquefied natural gas (LNG) or compressed natural gas (CNG). The transport process requires special attention, as such tanks are often large, heavy and dangerous cargoes.
(LNG-CNG) Gas Stock Tank Transport is a very sensitive and careful process. Technical knowledge and experience is required for the correct disassembly of tanks, loading, transporting and placing them in the appropriate vehicle for predetermined transport.
SD-C Haulage CO. follows and applies the following steps for a (LNG-CNG) Gas Stock Tank Transport…
Planning: Stock Tank A plan is made for transporting the tanks. This plan includes loading, unloading, determining the route, obtaining Heavy Transport (Oversize Transport) permits on the route where the transport will be made, and other logistics details.
Preparation: If the Stock Tank is used, the boiler is disassembled and the gas and electricity connections are disconnected by the technical teams in accordance with the procedures.
Loading: The dismantled or newly produced Stock Tank is loaded into the most suitable transport vehicle determined using the most appropriate equipment, and the Stock Tank is fixed to the vehicle on which the Tank is loaded.
Transportation: For the trouble-free delivery of the Stock Tank, safe navigation in traffic and transportation to the destination determined by the customer are ensured with the support of the pilot car on the predetermined route.
Delivery and installation: The Tank is lifted from the vehicle with the appropriate lifting equipment at the address specified by the customer, lowered to the floor determined by the customer, and the Stock Tank is delivered after its installation.